Beautiful work underway at the Australian Tapestry Workshop in South Melbourne. The palette of colours they have to choose from is amazing. Fantastic to watch the work in progress.
Went out for breakfast today to The Auction Rooms in North Melbourne. They have the best French Toast. Delicious:) And the chai was good too.
How to make very simple zip purses
These zipper purses are so simple to make and will help you practice your zip inserting skills and build your sewing confidents. Plus the finished are incredibly useful and a great way to use up smaller pieces of your fabric stash and any odd zips hanging about!
- A zip
- Outer fabric
- Lining fabric
- Matching or contrasting thread
Before you start cutting, decide how long you’d like your purse to be. Add 2cm to your desired finished length – this will be your cutting length. The purse for this example has a finished length of 14cm, so its cutting length is 16cm.
To work out your width just add 2cm to the length of the zipper you are using. This example uses a 16cm zip, so its cutting width is 18cm.
From the outer fabric and lining fabric cut two pieces.
Sew in the Zipper
Unzip the zipper so that the pull is in the middle and lay the zipper wrong side up along the top horizontal side. Align the top edge of the zipper with the top edge of the fabric. Centre the zipper so that its metal ends are approx. 1cm from each vertical side.
Place one of the lining fabric pieces on top, wrong side up. Pin all three layers together, being careful to keep the zipper centred and straight as you pin. When you get to the zipper pull, zip it over to a section that has already been pinned, so that the fabric of the zipper stays straight and flat.
Using your machine’s zipper foot, sew along the pinned edge with a 1 cm seam allowance being careful not to sew into the teeth of the zipper. When you reach the zipper pull, leave the needle down and pick up the machine’s foot, then slide the zipper pull to a section that you have already sewn so it doesn’t get in the way as you finish the seam.
Repeat for the other side of the zipper using the two remaining pieces of fabric.
You will end up with two identical sides with a zipper in the middle.
Sew the Purse Together
Pin the two outer fabric and lining fabric pieces together along all raw edges leaving an opening of approx. 6cm at the bottom of the lining fabric. Make sure the zip is left open and folded in such a way that you can pin its two fabric edges together with the teeth of the zipper pointing up and away from the outer fabric pieces.
Now pin the lining fabric pieces right sides together, leaving the zipper in the same orientation with the teeth pointed up and away from the outer fabric pieces.
Keep the lining section pulled out of the outer section and press both sections flat.
Pin the gap closed, tucking the seam allowance inside the lining. Edge stitch the gap closed. (Since this is the lining, you won’t see this little seam.)